Falcon 1092 Deluxe Induction Betriebsanweisung PDF herunterladen (Seite 20)

12 3

Control Panel and Doors

Avoid using any abrasive cleaners including cream cleaners.

For best results, use a liquid detergent.

The same cleaner can also be used on the doors, or

alternatively, using a soft cloth wrung out in clean hot soapy

water – but take care that no surplus water seeps into the

appliance.

After cleaning, polish with a dry cloth.

Ovens

‘Cook & Clean’ Panels

The ovens have side ‘Cook & Clean’ panels which have been

coated with a special enamel that partly cleans itself. This

does not stop all marks on the lining, but helps to reduce the

amount of manual cleaning needed.

These panels work better above 200 °C. If you do most of your

cooking below this temperature, occasionally remove the

panels and wipe with a lint free cloth and hot soapy water.

The panels should then be dried and replaced and the oven

heated at 200 °C for about one hour. This will ensure that the

panels are working eectively.



DO NOT use steel wool (or any other materials that

will scratch the surface).



DO NOT use oven cleaning pads.

The Oven Shelf Supports

The shelf supports on the oven sides can be removed for

cleaning.

Removing the Oven Shelf Supports

Remove the oven shelves. Pull the top of the shelf support up

and away from the oven side and then lift the support away

from the locating bracket at the bottom of the oven side

(Fig.5-6).

Retting the Oven Shelf Supports

To ret the side support. Locate the tag at the bottom of the

support into the slot in the locating bracket in the oven side

(Fig.5-7). Now locate the tops of the side arms in the holes at

the top and gently push down.

Fig.5-6

Fig.5-7

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Keine Kommentare

Falcon 1092 Deluxe Induction Betriebsanweisung Seite 20